| |
 | Fitting a Ground Anchor
Fitting a Hardie-Secure Ground Anchor is as easy as 1,2,3...
If you purchase the ground anchor kit, the kit contains everything you need to install the ground anchor.
Follow these simple instructions to fix your GroundAnchor to a concrete floor or solid brick wall, the choice is yours.
Step 1.
Select the location to fix your Ground Anchor , making sure the surface you fix to is flat, allowing the ground anchor to swivel / rotate.
Step 2. Using the masonry drill bit provided in the Ground Anchor Kit, together with a hammer drill, slowly (clearing the dust as you go), make a hole (the depth of hole is indicated by which size Gorund Anchor you are fitting).
Step 3.
Bolt down the 'outer swivel circle' by retaining the 'inner base circle'. Which is the part that bolts to the floor.
Step 4.
Taking note to fit the spacer below 'the inner base circle' tighten the bolt, using the allen key provided. The outer part should swivel on the inner base circle of the ground anchor.
Step 5.
When the ground anchor is perfectly positioned (and only when). carefully hammer the 'bolt cap' using a piece of wood under the hammer, to avoid marking the cap.
This should fit flush with the inner circle.
Thats, it - You have successuly fiited and installed your Hardie-Secure Ground Anchor
A ground anchor is an excellent way to conveniently secure your motorbike caravan scooter etc at home.
Buy Ground Anchors |
|
|  |  | |  | | Large Stainless Steel Ground Anchor SetLarge Ground AnchorHardie-Secure Chain 1.1mMedium Ground Anchor |
|
|
